Payment & Shipping Terms:
|Product Name:||Rechargeable Led Miner Light||Material:||ABS|
|Lighting Time:||>16h||Battery Type:||Lithium Ion|
|Rated Capacity:||6Ah||Main Lighting Source:||>5000Lx|
a) The miner’s cap lamp rechargeable led miner light consists of Li - ion batteries and a new generation LED light source.
b) The electronic switch controls the ON/OFF of the main light source and auxiliary light sources.
c) The miner’s cap lamp has multi-functional protection.
d) A charging control circuit is fitted inside the headpiece of the miner’s cap lamp. This circuit enables the miner’s cap lamp to be charged on other manufacturers’ charger, but it shall meet the requirements of Section Charging;
e) Due to the high efficiency and long life of the LED light source, it is not necessary to replace within the lifetime of miner’s cap lamp.
f) The miner’s cap lamp is compact, light in weight, maintenance free, long in service life,intrinsically safe and environmentallyfriendly.
a) When the miner’s cap lamp voltage is less than 2.9 volts, the lamp will automatically go out, at this time, miner’s cap lamp needs to be charged timely.
b) The charging management circuit inside the miner’s cap lamp allows the use of our charger or those chargers of an approved manufacturer. (When using a lead-acid battery charger to charge the LED miner’s cap lamp, the charging voltage should not exceed 8 volts.) While charging, the auxiliary light will flash every 5 seconds and stop flashing when the chargingprocess is complete.
The Charging contacts of the miner’s cap lamp type KL6Ex have terminal parameters of Um = 8V and must be supplied via a HBC fuse of 1A maximum.
The miner’s cap lamp complies with the following Standards:
EN 60079-0: 2012; EN 60079-11: 2012; EN 60079-35–1: 2011; EN 50303:2000
KL6Ex rechargeable led miner light consists of Li-ion batteries, protection circuit, charging circuit, LED light source, cable, headpiece shell and battery pack (made of flame-retardant, anti-static ABS) etc.
(a) Short Circuit Protection - In the event of a short circuit in the headpiece or cable, the battery protective plate will cut off the power supply in 15ms. If, for any reason, this protection fails to operate, the current limiting resistance and quick-acting fuse will restrict the current to meet the requirements of the intrinsic safety standard.
(b) Over-Current Protection- In the case of an abnormal current increase, the battery protective plate will cut off the power supply in 15ms. If, for any reason, this protection fails to operate, the current limiting resistance and quick acting fuse will restrict the short circuit to meet the requirements of the intrinsic safety standard.
(c) In addition to the above battery protection, the battery cells have in-built PTC protection devices for over-current and over-heating.
|Model||rechargeable led miner light KL6Ex|
|Main lighting source||Operating current||0.28A|
|Max illumination (at 1m away from the lamp)||When lighting begins||>5000Lx|
|After lighting for 11h||>5000Lx|
|Rated power for LED auxiliary lighting source||0.2W|
|Life of cap lamp||>2yrs|
|Explosion-proof type||Ex ia I Ma|
|Dimensions of battery case||105*31*120mm|
|Production Certificate||ATEX Certificate No.||Baseefa09ATEX0205-Issue2|
|Matching information||Optional device||
KZC1B Single charger
KZC10A Combined charger
KZC80A Modular charging rack
KZC100Z intelligent charging rack
|Packaging information||Carton Size(paper carton)||423*328*218mm|
Miner's Lamp charger
With ISO9001, ISO14001, ISO18000, CE authorized lab on respiratory devices for PPE directive, 21 years’ experience, ODM, OEM service provided, ASTTAR is specialized in developing and manufacturing of explosion-proof safety technology and products. We mainly export products of three categories:
1. Mining underground rescue product
2. Mining explosion-proof lamp
3. Mining explosion-proof instrument and meter